Siena

Save with Local Pick-Up

Pick-up Price: 

$4.99

 per sq. ft.

Ship-to Price: 

$5.29

 per sq. ft.

$120.19

 per box

22.72

square feet per box

Sold per box only.

Free Shipping with any purchase of 23 boxes or more.

Consider adding 7-12% for 

Siena’s wear layer is constructed from 3-millimeter solid European Oak hardwood and its core is comprised of two to nine-layer plywood. European Oak flooring is one of the most sought after hardwood choices in the US. All of these layers combined to result in a 5/8″(15mm) total plank thickness and each plank measuring to 7-1/2” in width.

Each box of Siena contains 22.72 square feet of engineered hardwood. Wire bristles are used to remove the softer grain within the wood, which accentuates the harder grain and creates a beautifully textured surface with added character. Our flooring is constructed from layers of plywood, topped by a solid European Oak veneer.

PLEASE NOTE: True color may vary based on your monitor settings.

Product Specifications
Collection
Pavia
Grade
ABCD (Character)
Construction
Engineered Hardwood
Tone
Grey
Species
White Oak
Surface Finish
Lacquer
Surface Texture
Wire Brushed
Straight Plank
Pattern
Pattern
Straight Plank
Product Design
Plank Length
Random Up to 73″ (Most pieces are 73″)
Plank Thickness
5/8″
Plank Width
7-1/2″
Wear Layer
3mm
Box per sq ft
22.72
Janka Rating
  • 1360 lbf
  • White Oak
Lacquer Maintenance and Accessories

Questions and Reviews

Share your thoughts!

Let us know what you think...

What others are saying

  1. Question

    Laura Gannan

    Can. Your engineered floors be installed. Over warmup brand radiant. Heat? Or any carbon. Based film radiant heated

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • fernando

      Hello Laura,

      Radiant Heat Subfloors can be concrete, wood or a combination of both.

      The type of subfloor determines subfloor preparation, If the Radiant Heat subfloor is concrete the system should be fully operating at a normal temperature for a minimum of 21 days prior to floor installation, to dry out residual moisture.

      The system MUST then be turned off 24 hours prior to installation and must remain off for 24 hours after installation so that the adhesive does not cure excessively fast.

      After the 24 hours, the system temperature can be gradually raised again (over a 7-day period) up to the desired level. The maximum allowable subfloor surface temperature over radiant heat is 85˚F. Radiant heat is a dry heat.

      A humidification system is recommended to maintain wood flooring in its comfort zone. Surface checking, excessive gapping, etc. can be expected if the proper humidity level is not maintained between 30-50% year-round, or the surface temperature exceeds 85˚F.

      To minimize the effect that rapid change in temperature will have on the moisture content of the wood floor, an outside thermostat is recommended.

      Thank you
      Fernando ADM Flooring Design

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Consider buying 10% More for Waste

Due to cuts, breaks and other waste when installing your tile, you should multiply the square footage of your area by 10% and purchase enough tile to cover this amount.